ADS-TEC TT13 User Manual - Manual (Page 29)

Tablet PCs TT13
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
29
6.2 TT13 HDD P ROTECTION
Note:
The application is attended to protect the read-/write cycle of the hard disk. Via a sensor,
sudden kinetic changes or agitation is being recognized. To prevent damage and possible
data loss, the reading head will be placed to a neutral position.
The application is used to control the HDD Protection drivers and services. It will start
minimized and adds the tray bar a icon.
Illustration1: Traybar Icon
Via the icon, the current status of the HDD Protection is being shown. If the HDD is
blocked, the following status is shown.
Illustration2: Traybar icon with activated HDD Protection
Double clicking or using the context menu will maximize the application.
The configuration application (Illustration3) enables the power on /off of the icon the
traybar. Additionally the durability of protection after, a agitation, can be configured in ms
at the “HDD Protection Time”. The sensibility of protection can be changed by four steps.
These steps are: High, Middle, Low and Inactive. The protection can be activated manually
and stays activated until the user is deactivating the protection.
Illustration3: Configuration surface