ADS-TEC BPC1000 - Manual (Page 19)

Industrial PCs BPC1000
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
19
5.7 DVI I NTERFACE
The DVI Interface is used to transfer analog and digital video signals. A DVI-I Cable is
required to connect a digital display to the device. It is also possible to connect a VGA
display by using a suitable DVI-VGA adapter.
Notice:
The DVI Interface is a Single Link Interface. The video signals are transferred analog and
digital.
PIN-NUMMER SIGNAL NAME
1 TMDS Data2-
2 TMDS Data2+
3 TMDS Data2/4 Shield
4 N/C
5 N/C
6 DDC Clock [SCL]
7 DDC Data [SDA]
8 Analog vertical sync
9 TMDS Data1-
10 TMDS Data1+
11 TMDS Data1/3 Shield
12 N/C
13 N/C
14 +5V Power
15 Ground (for +5V)
16 Hot Plug Detect
17 TMDS Data0-
18 TMDS Data0+
19 TMDS Data0/5 Shield
20 N/C
21 N/C
22 TMDS Clock Shield
23 TMDS Clock+
24 TMDS Clock-
C1 Analog Red
C2 Analog Green
C3 Analog Blue
C4 Analog Horizontal Sync
C5
Analog GND Return: (analog R,
G, B)