Industrial pcs mcr5000 – ADS-TEC MCR5000 User Manual
Page 37
Industrial PCs MCR5000
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
37
R
EMOVING THE RETAINING CLIP
2)
The battery is kept in place with a plugged in retaining clip. The retaining clip can be
removed from the battery compartment by carefully lifting the external tabs by using a
flat-bladed tool (screw driver).
R
EPLACING THE BATTERY
3)
Now the lithium battery can be removed. It must be replaced by the same battery
type, only. The type of battery to be used is:
Saft LS 14250 / 1/2AA 3.6V 1000mAh / Lithium battery
Please observe the correct polarity when replacing the battery.
Warning:
There is a risk of explosion if the battery is replaced with the wrong type or with the
wrong polarity. Adhere to the valid regulations for environmentally-friendly disposal of
batteries if the battery has reached the end of its life cycle.