3 – how to connect mxl to the ecu – AiM MXL User Manual
Page 10
MXL
User manual
Release 1.24
1 9
2.3 – How to connect MXL to the ECU
MXL can sample data out coming from the ECU using the proper CAN/RS232
interface cable.
To know if the vehicle ECU is supported by MXL – and for further information
concerning ECU and AIM loggers connection – refer to the related documentation
freely downloadable from AIM corporate website at
nload
area, ECU section.
In case the conversion of non-standard CAN or RS232 lines is needed, contact our
technical support.
It is suggested to always refer to the ECU user manual for any further information
concerning pins and cables connection. Moreover – considering that ECU
manufacturers constantly improve their products – refer to their websites for more
updated information.
To connect MXL to the ECU use a serial RS232 or a CAN cable and connect it to the
corresponding non cabled wirings of the logger wiring.
In case an AIM wiring is used all cable are labelled, otherwise it is necessary to
identify the cables.
www.aim-sportline.com
9