AiM MXL - Manual (Page 19)

MXL
User manual
Release 1.24
2 3
2.8 – How to connect MXL to the MemoryKey
MXL can be connected via CAN bus to MemoryKey. It allows to download data
without connecting the logger to a PC. The connection has to be done as follows:
• MXL Pista: connect the MemoryKey to 5 pins Binder 712 female connector
on the back of the logger (pin 1 = CAN+ ; pin 4 = CAN-)
• MXL Pro/MXL Pro05: connect MemoryKey to 22 pins Deutsch type
connector using the proper cable labelled CAN Exp (pin 1 = CAN+; pin 4 =
CAN-).
Note: it is not possible to connect MemoryKey to MXL Strada.
See:
• Appendix “A.1” for further information concerning the loggers pinout;
• loggers wiring user manuals for further information concerning MXL wiring;
• MemoryKey user manual for information concerning its connexion with MXL.
The figure below shows a CAN network where MXL is connected to a MemoryKey
too. In case Data Hub is not available plug MemoryKey directly into MXL as
explained before.
www.aim-sportline.com 18