AiM MyChron3 Basic - Manual (Page 37)

37
Software installation
You’ll need the USB cable/software kit in order to use the Race Studio 2
software with your MyChron 3. This is a separate kit that does not come
standard with the MyChron 3 Basic or Basic 2T. Check with your local dealer to
purchase this kit.
Once you have the kit, to install the software, insert the CD inside the CD-ROM
drive: if the autorun option is enabled ( most of cases ), software installation will
automatically start, otherwise click twice on SETUP icon.
The 1
st
screenshot that will appear on your PC’s monitor concerns the
installation language choice. Through a pop-up menu it will be possible to
choose the preferred language.
It is reminded that the installation language choice does not limit the software to
working with only that language.
In the following image you can see the 2
nd
installation step: please read carefully
the text and then click on the Next icon.