AiM MyChron3 Basic - Manual (Page 42)

42
Installing the USB drivers
Please, read these instructions carefully in order to correctly install the
USB drivers: an incorrect installation may cause serious problems on your
computer.
To connect your MyChron 3 to a PC, use the USB cable that comes with the
download kit.
With the PC and the MyChron 3 turned off, connect the cylindrical connector of
the cable to the MyChron 3 USB port and the other end to your PC’s USB port.
Now turn on both the computer and MyChron 3.
During restart time, the operating system will recognize a new hardware and will
ask you to install the proper drivers, drivers that are included in Race Studio 2
installation CD-ROM.
On the two following pages are two examples concerning the USB driver
installation for Microsoft Windows 98 ™ and Microsoft Windows 2000 ™.
How to install the USB Driver for Windows 98 ™:
1. Press [ Next ] button when the “Add new Hardware wizard” window
appears.
2. Select [ Search for the best driver for your device ] and press the [ Next ]
button again.
3. Place the Race Studio 2 disk in the computer’s CD-ROM drive if it is not
already there.