AirLive CamPro HD User Manual
Page 81
![background image](/manuals/553865/81/background.png)
2. Main-console
AirLive CamPro HD User’s Manual 76
−
Event Setting/ Edit Event / Advance Setting/ Motion
1. Define motion detection area:
Click “Default” button to select
all image for motion detection.
Select “Add” and use mouse to
specify a rectangle window to add a
detection area.
Select “Delete” and use mouse
to specify a rectangle window to
remove a detection area.
The area covered by
transparent red color is motion
detection area.
2. Set motion detection sensitivity:
Set the motion detection
sensitivity level between 1 and 5.
Level 5 means the highest motion
detection sensitivity.
3. Set detection interval:
Set this value to define the
interval of motion detection. If set longer value, means system will use less CPU
computing power to check motion detection.
4. Adjust parameter by detection result:
When motion detection event is triggered, system will display “M” at left-up
corner and you can adjust these two parameters by checking detection result to
get best settings.
−
Event Setting/ Edit Event / Advance Setting/ Digital Input
In this mode, system will
check status of Digital Input
periodically. Select “Open”
or “Close” to define which
status will trigger an event.