AirLive GW-300R - Manual (Page 10)

1. Introduction
AirLive GW-300R User’s Manual 6
1.5 Procedure for Hardware Installation
Step 1. Attach the antenna.
1.1. Remove the antenna from its
plastic wrapper.
1.2. Screw the antenna in a clockwise
direction to the back panel of the unit.
1.3. Once secured, position the
antenna upward at its connecting joint.
This will ensure optimal reception.
1.Turn off the Power
Switch first.
Step 2 Insert the Ethernet cable into
LAN Port:
Insert the Ethernet patch cable into
LAN port on the back panel of Router,
and an available Ethernet port on the
network adapter in the computer you
will use to configure the unit.