AirLive GW-300R - Manual (Page 90)

FAQ and Troubleshooting
AirLive GW-300R User’s Manual 86
rt and Lan
4.Why can I not connect Internet even though the cables are plugged in Wan po
port and the leds are blink. In addition, Status led is also normal and I can configure web
management?
A: Make sure that the network cable from DSL or Cable modem is plugged in Wan port of
Router and
that the network cable from Lan port of router is plugged in Ethernet adapter. Then, please
check which wan type you use. If you are not sure, please call the isp. Then please go to
this page to input the
information isp is assigned.
5.When I use Static IP Address to roam Internet, I can access or ping global IP
202.93.91.218, But I can not access the site that inputs domain name, for example
HH
Uhttp://espn.comU HH ?
A: Please check the dns configuration of Static IP Address. Please refer to the information
of ISP and assign one or two in dns item.