AirLive GW-300R - Manual (Page 64)

3. Making Configuration
AirLive GW-300R User’s Manual 60
3.3.4.4 SNMP
In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give a
user the capability to remotely manage a computer network by polling and setting terminal
check Local, Remote or both to enable SNMP function. If Local is checked, this
sponse request from LAN. If Remote is checked, this device will response
.
et Community
etting the community of SetRequest your device will accept.
1, IP 2, IP 3, IP 4
put your SNMP Management PC’s IP here. User has to configure to where this device
hould send SNMP Trap message.
NMP Version
lease select proper SNMP Version that your SNMP Management software supports.
values and monitoring network events.
Enable SNMP
You must
device will re
request from WAN
Get Community
Setting the community of GetRequest your device will response.
S
S
IP
In
s
S
P