AirLive IP-1000R v2 - Manual (Page 11)

3. Configuring the IP-1000R v2
7 AirLive IP-1000R v2 User’s Manual
3.2.1 Windows 95/98/ME
1. Select Control Panel - Network. You should see a screen like the following:
2. Select the TCP/IP protocol for your network card.
3. Click on the Properties button. You should then see a screen like the following.
Ensure your TCP/IP settings are correct, as follows:
 Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the
default Windows setting, and it is recommended to use it. By default, the IP-1000R v2 will
act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the IP-1000R v2.
 Using "Specify an IP Address"
If your PC is already configured, check with your network administrator before making the
following changes: