AirLive IP-1000R v2 - Manual (Page 8)

2. Install the IP-1000R v2
AirLive IP-1000R v2 User’s Manual 4
WAN
The LED lights up a solid green when the WAN port is connected to a Cable/DSL Modem
successfully. If the LED is flashing, the WAN port is sending or receiving data from the
Cable/DSL modem.
LAN (Link/ACT)
The LED lights up a solid green when the port is connected to a 100Mbps Fast Ethernet
device. If the LED is flashing, the port is sending or receiving data over the network.
WAN
One RJ-45 10/100Mbps Auto-MDIX WAN port for connecting to your Cable/DSL Modem
LAN (1-4)
Four RJ-45 10/100Mbps Auto-MDIX ports for connecting to Ethernet enabled computers.
RESET
Use a pin-shaped object to reset the Router to factory default settings. Resetting the Router
will also reset the login password to the default.
Power
Connect one end of the included power adapter to the power port on the Router and the
other end into a power outlet.
2.4 Hardware Connections
Connect the IP-1000R v2 Broadband Router
1. Connect one end of the included Ethernet cable to the WAN port on the IP-1000R v2
Broadband Router.
2. Connect the other end of the included Ethernet cable to the Ethernet port on the Cable or
DSL modem.
3. Connect one end of another Ethernet cable to the Ethernet port on the computer and the
other end of the Ethernet cable to any of the LAN ports on the Router. Since the IP-1000R