AirLive IP-1000R v2 - Manual (Page 17)

3. Configuring the IP-1000R v2
13 AirLive IP-1000R v2 User’s Manual
6. The DNS should be set to the address provided by your ISP, as follows:
 Click the DNS tab.
 On the DNS screen, shown below, click the Add button (under DNS Service Search
Order), and enter the DNS provided by your ISP.
3.2.4 Windows Vista
1. Click the “Start” button then right-click “Network” then click “Properties”.
2. Under “Tasks” located on the left-hand side of the windows, click “Manage network
connections”.
3. Right-click “Local Area Connection” listed under “LAN or High-Speed Internet” then
click “Properties”.
4. Click “Continue” to open the “Local Area Connection Properties” windows.
5. Select “Internet Protocol Version 4 (TCP/IPv4)”, then click “Properties” button.
6. Select “Obtain an IP address automatically” and “Obtain DNS server address
automatically” in “General” tab.
7. Click “OK” button.