AirLive Live-GSH8T - Manual (Page 12)

3 Installation of the Switch
6
Live-GSH8T Gigabit Ethernet Switch
3
Installation of the Switch
Quick Installation
Live-GSH8T Gigabit Ethernet Switch is fully compliant with 10/100/1000BASE-T Gigabit
Ethernet standards. Live-GSH8T is primarily designed as an ideal solution to enhance your
workgroup/corporate
3 Steps to Quick Installation
Step 1. Power on the Switch: connect the power adapter to the switch and the electric outlet.
Step 2. Connect network devices to the Switch: connect either workstation, server, switch, bridge
or router to the station port (10/100/1000BASE-T), using 100 ohm unshielded twisted pair (category
5E UTP) or shielded twisted-pair (STP) cable.
Step 3. Check the LED indicator check the LED indicator to make sure all the cable are properly
connected.
Desktop Installation
Live-GSH8T Gigabit Switch has four rubber pads attached on each corner of its underside. These
pads serve as cushions against vibration and prevent the switch from sliding off its position. They
also allow adequate ventilation space when you place the switch on top of another device.
Fig. 3-1 Desktop installation