AirLive Live-GSH8T - Manual (Page 22)

5 LED Indicators
16
Live-GSH8T Gigabit Ethernet Switch
LED Summary Table
A summary of LED status is listed in Table 5-1 below:
LED indicator Color Status Meaning
System LEDs
Power LED
● Green ON
OFF Power ON
Power OFF
Diagnostic LEDs
Bcst/DIAG
OvUn Flow
● Yellow
● Yellow
ON
Flashing
OFF
Flashing
The System is doing Power-On
test, the light should remain off
after a few seconds. If stay on, the
system has failed the power-on test
The Broadcast Traffic has
exceeded 5%, the switch is
filtering out broadcast packet.
The system is working normally
The Unicast Buffer has overflowed
Gigabit Statoin Port
LEDs
10M Link/Act ● Green
●
Yellow
ON
Blinking
OFF
ON
Blinking
OFF A 10Mbps at Full duplex mode
Connection is made
Transmitting/Receiving
No connection is made
A 10Mbps at Half duplex mode
Connection is made
Transmitting/Receiving
No connection is made
100M Link/Act ● Green
●
Yellow
ON
Blinking
OFF
ON
Blinking
OFF A 100Mbps at Full duplex mode
Connection is made
Transmitting/Receiving
No connection is made
A 100Mbps at Half duplex mode
Connection is made
Transmitting/Receiving
No connection is made
1000M Link/Act
* In 1000Mbps mode,
it only supports full
duplex mode.
● Green ON
Blinking
OFF A 1000Mbps at Full duplex mode
Connection is made
Transmitting/Receiving
No connection is made
Table 5-1 Station Port LED