AirLive Live-GSH8T - Manual (Page 20)

5 LED Indicators
14
Live-GSH8T Gigabit Ethernet Switch
5
LED Indicators
Before connecting any network device to Live-GSH8T Gigabit Ethernet Switch, you should take a
few minutes to look over this chapter and get familiar with the front panel LED indicators of your
Switch. The front-panel LED indicators of Live-GSH8T Gigabit Ethernet Switch comprise three
sets of LEDs: System Status LEDs, Diagnostic LEDs, and Gigabit Port LEDs. Each set of LEDs
gives specific information concerning the system status, station port status or the Gigabit port status:
Comprehensive LEDs
System LED
Power LED enables users to monitor the system power Status.
Diagnostic LEDs
The Diagnostic LEDs consist of the Bcst/DIAG and OvUn Flow LEDS. Together, they display the
operating status of the switch and the traffic monitor
Station Port LEDs
Gigabit Port LEDs show the port status of the Gigabit Ports on the optional modules installed.
Link/Act, 10/100 and 1000/FDX LEDs indicate the connection status of the Gigabit port.
For the layout of LED indicators, please refer to Fig. 5-1 below.
Fig. 5-1 Front-panel LED indicators
The specific function of each LED will be described in full details in the following sections:
Power LED
Diagnostic LEDs
Station Port LEDs