AirLive MD-720 - Manual (Page 14)

2. Package Contents and Installation
AirLive MD-720User’Manual 9
2.3 Hardware Installation
Follow these steps to install the AirLive MD-720 and connect all cables:
A. Hardware Installing
1. Before connecting the Ethernet cable, please use one hand to hold top cover and
another hand to press the bottom of camera.
2. Then shift top cover to left (counter-clockwise) to open the dome cover.
B. Wall mounting and Ceiling mounting
1. Attached the drill template to the wall. Drill three holes into the wall, which two for screws
and one for cable (if you want to route cables through conduit hole). Then hammer the
supplied plastic anchors into the screw holes and secure the plate with supplied screws.
2. Align the three holes on the base of camera with the two plastic anchors on the wall or
ceiling. Insert the supplied screws to the corresponding hole and screw them.
3. Adjust the angle of camera to aim the shooting area.