AirLive MD-720 - Manual (Page 16)

2. Package Contents and Installation
AirLive MD-720User’Manual 11
Rotate Notice: DO NOT rotate the lens over 2 rounds. Otherwise, the camera lens module
will be damaged.
D. Connect cables and power supply
1. The camera has only Power over Ethernet (PoE) built-in (there is no DC connector
inside.)
2. Using a standard RJ-45 network cable, connect the IP Camera to a PoE-enabled Hub /
Switch / Router.
Note:
If using a non-PoE switch, please use a PoE power injector to connect the camera
E. Completion
1. Clean the dome bubble to remove the dust and finger print.
2. Align the slide cover down to the U-shape position
3. Tighten the dome cover to the clockwise direction and make slide cover reaching the
routing hole.