AirLive POE-100HD - Manual (Page 30)

5. Administrating the Device
AirLive POE-100HD/
POE-100HD-ICR User’s Manual 26
RTSP Port:
Choose the RTSP port. The RTSP protocol allows a connecting client to start a video
stream. Enter the RTSP port number to use. The default value is 554.
RTP Port:
Specify the range of transmission port number of video stream. The default range is
50000 to 50999. User can specify a number between 1024 and 65535.
UPnP
UPnP is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. This device is an
UPnP enabled Video Server. If your operating system is UPnP enabled, the device will
automatically be detected and a new icon will be added to “My Network Places.” If you do
not want to use the UPnP functionality, it can be disabled.
In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT
traversal when your device is located on an intranet (LAN) and you wish to make it
available from the other (WAN) side of a NAT router. With NAT traversal properly configured,
all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the device.