AirLive POE-100HD - Manual (Page 31)

5. Administrating the Device
AirLive POE-100HD
/POE-100HD-ICR User’s Manual
27
UPnP:
To enable or disable the UPnP service here.
Friendly Name:
Shows the friendly name of this device here.
UPnP NAT Traversal
When enabled, the device will attempt to configure port mapping in a NAT router on
your network, using UPnP™. Note that UPnP™ must be enabled in the NAT router
first.
Port Range:
The port range will open in NAT router.
External IP address:
Show the IP address and port for WAN access through Internet. If NAT traversal is configured
successfully, user can use this IP address and port to access this device. The external IP address
is not shown in case NAT traversal function is failed.