AirLive POE-100HD - Manual (Page 49)

5. Administrating the Device
AirLive POE-100HD
/POE-100HD-ICR User’s Manual
45
Test:
Send a test mail to mail server to check this account is available or not.
SMTP Port:
Set port number of SMTP service.
SMTP Authentication:
Select the authentication required when you send an e-mail.
Disable: if no authentication is required when an e-mail is sent.
Enable: if authentication is required when an e-mail is sent.
Authentication User name:
Type the user name for the SMTP server if Authentication is Enable.
Authentication Password:
Type the password for the SMTP server if Authentication is Enable.
E-mail To:
Type the receiver’s e-mail address.
E-mail From:
Type the sender’s E-mail address. This address is used for reply e-mails.
E-mail Subject:
Type the subject/title of the e-mail.
5.1.8 Object Detection : Setup Object detection
Use this menu to specify motion detection window 1 to window 10 and set the conditions for
detection while observing a captured image.
Add and Del:
To add or delete the motion windows. User can specify up to 4 Included and/or
Excluded windows to monitor the video captured by this device. By dragging mouse on
the image, you can change the position and size of the selected motion window
accordingly.
Included or Excluded Window:
These windows can be specified as Included or Excluded type.
Included windows target specific areas within the whole video image
Excluded windows define areas within an Include window that should be ignored
(areas outside Include windows are automatically ignored)