AirLive RS-2500 - Manual (Page 14)

2. Install the RS-2500
AirLive RS-2500 User’s Manual 8
2.5 LED Table
This section describes the LED behavior of RS-2500.
You can find the LED on the Front side of the RS-2500.
Power
Steady Green – Power On device
OFF – No Power
Status
Steady Green – Ready to use
Blinking – At the booting process
WAN1/2, LAN, DMZ
Steady Green – Cable is connected
Blinking – Packets is sending/receiving
2.6 Restore Settings to Default
If you have forgotten your RS-2500’s IP address or password, you can restore your
RS-2500 to the default settings by pressing on the “reset button” for more than 10 seconds.
You can find the reset button at back panel. Please see diagram below for details.