AirLive RS-2500 - Manual (Page 45)

7. Interface
AirLive RS-2500 User’s Manual 40
7.1 LAN
 Modify LAN Interface Settings
STEP 1 ﹒ Select LAN in Interface and enter the following setting:
 Enter the new IP Address and Netmask
 Select Ping, HTTP and HTTPS
 Click OK (Figure 7-1)
Figure 7-1 Setting LAN Interface WebUI
The default LAN IP Address is 192.168.1.1. After the Administrator
setting the new LAN IP Address on the computer, he/she have to
restart the System to make the new IP address effective. (when the
computer obtain IP by DHCP)
Do not cancel WebUI selection before not setting Permitted IPs yet,
because the Administrator cannot be allowed to enter the RS-2500
WebUI from LAN.