AirLive RS-2500 User Manual
Page 33
6. Configure
AirLive RS-2500 User’s Manual
28
SIP protocol pass-through
Select to enable the function of RS-2500 of passing SIP protocol. It is also possible that the
SIP protocol can pass through RS-2500 without enabling this function depends on the SIP
device’s type you have.
Administration Packet Logging
After enable this function, the RS-2500 will record packet which source or destination IP
address is RS-2500, and record in Traffic Log for System Manager to inquire about.
System Reboot
Once this function is enabled, the RS-2500 will be rebooted.
STEP 1
﹒
Reboot RS-2500：Click Reboot button next to Reboot RS-2500 Appliance.
STEP 2
﹒
A confirmation pop-up page will appear.
STEP 3
﹒
Follow the confirmation pop-up page; click OK to restart RS-2500.
(Figure 6-6)
Figure 6-6 The else Function Settings