AirLive SKY-211 - Manual (Page 8)

4. Driver Installation
This section describes the USB VoIP Gateway Driver installation procedures. Follow the following instructions
step by step to complete the USB VoIP Gateway driver installation.
Please make sure you have your broadband Internet access connected
before installing this USB Internet Phone driver. !
Step 1: Turn on your Computer.
Step 2: Check the availability of your broadband Internet access by simply access the “Google” web site
( Launch your web browser and enter the Google web address: www.google.com in the address
field the press “Enter”). The Google website index page will display on your screen if your
broadband connection is correctly set and access to the Internet is available.
Step 3: Connect the USB cable provided to the USB port of the USB VoIP Gateway, and connect the other
end of the USB cable to a USB port on your computer.
A “Found New Hardware Wizard” screen will pop-up as shown below. Click “Cancel” to close the
wizard.
6 AirLive Sky-211 User Manual