AirLive WN-350R - Manual (Page 100)

2. System and Network Setup
91 WN-350R User’s Manual
CTS Protect (10): Enabling this setting will reduce the chance of radio
signal collisions between 802.11b and 802.11g/n
wireless access points. It’s recommended to set this
option to ‘Auto’ or ‘Always’. However, if you set to
‘None’, your wireless router should be able to work
fine, too.
WMM (11): The short of Wi-Fi MultiMedia, it will enhance the data
transfer performance of multimedia contents when
they’re being transferred over wireless network. If you
don’t know what it is / not sure if you need it, it’s safe
to set this option to ‘Enable’, however, default value is
‘Disable’.
After you finish these wireless settings, please click ‘Apply’ button , button, and
the following message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on router
setup, or click ‘Apply’ to reboot the router so the settings will take effect
(Please wait for about 30 seconds while router is rebooting).