AirLive WN-350R - Manual (Page 138)

3. Advanced Functions
129 WN-350R User’s Manual
Please select ‘Enable’ or ‘Disable’ to enable or disable firewall function of this
router, the click ‘Apply’ button, and the following message will be displayed on
your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other
setup procedures, or click ‘Apply’ to reboot the router so the settings will take
effect (Please wait for about 30 seconds while router is rebooting).
3.3.1. Access Control
This function allows or denies computers with specific MAC address from
connecting to the network; it can also allow or deny computers with specific IP
address, protocol, or port.
Please click ‘Firewall’ menu on the left of web management interface, then
click ‘Access Control’, and the following message will be displayed on your
web browser: