Self cleaning the oven, Setting the self-clean mode, Press cooking mode – Bosch ELECTRIC FREE-STANDING CONVECTION RANGE User Manual

Page 33: Press start. self clean flashes. press start, Press start again to begin the self- clean, Delaying the start of the self-clean, Press start, Self clean end appears in the display

Advertising
background image

Cleaning and Maintenance

English 31

Self Cleaning the Oven

Our ovens feature a self-cleaning function that eliminates the manual labor
involved with cleaning your oven. During self-cleaning, the oven uses a very high
temperature to burn away food soil and grease.

It is common to see smoke and/or an occasional flame-up during the Self-
Clean cycle, depending on the content and amount of soil remaining in the
oven. If a flame persists, turn off the oven and allow it to cool before opening
the door to wipe up the excessive food soil.

In a normal Self-Clean mode, the door does not lock at the beginning of the
cycle; However, it does lock prior to reaching the high self-clean tempera-
tures. The door lock symbol will appear in the display at this point. The door
does not lock at the start of the cycle.

The oven light does not operate during this mode.

During Self-Clean, the kitchen should be well ventilated to help eliminate
odors associated with Self-Clean. Odors will lessen with use.

Four hours is the preset length. The range can also be set to 3 or 5 hours.

The mode automatically stops at the end of the clean hours.

When the oven heat returns to 350° F after cleaning, the automatic door lock
will release and the door can be opened.

To cancel or stop while the mode is operating, press OFF.

Setting the Self-Clean Mode

1. Press COOKING MODE.
2. Turn knob until SELF CLEAN mode appears. Press START.
3. The default cleaning time is 4 hours. To

change cleaning time, turn knob to change
number of hours. Otherwise, continue to
step 4.

4. Press START. SELF CLEAN flashes. Press

START.

5. REMOVE RACKS appears in the display

as a reminder to remove oven racks.

6. Press START again to begin the self-

clean.

Note: In a normal Self-Clean mode, the door
does not lock at the beginning of the cycle; However, it does lock prior to reaching
the high self-clean temperatures. The door lock symbol will appear in the display
at this point. If door does not lock, press OFF and do not self-clean; phone 800/
944-2904 for service.

Delaying the Start of

the Self-Clean

Note: The time of day must be correctly set for this option to work properly. See
section “Setting the Clock” in “Setting Up Your Range”.

1. Press COOKING MODE.
2. Turn knob until SELF CLEAN mode appears. Press START.
3. The default cleaning time is 4 hours. To change cleaning time, turn knob to

change number of hours. Otherwise, continue to step 4.

4. Press START.
5. Turn knob until DELAYED CLEAN mode

appears. Press START.

6. SELF CLEAN END appears in the display.
7. Turn knob to enter time you want self-clean to

end: Set hours, press time, set minutes.

8. Press START. The display will remind you to

remove oven racks.

9. Press START. The display shows DELAYED CLEAN. The self-clean will

automatically start at the appropriate time.

Note: In the Delayed Self-Clean Mode, the door latch automatically activates at
the beginning of the cycle. The door lock symbol will appear in the display.

3

SELF CLEAN

3: 00

REMOVE RACKS

4: 00

SELF CLEAN

3: 00

SELF

Delayed

5: 45

SELF

SELF CLEAN END

Advertising