Allen&Heath ME-1 - Manual (Page 3)

User Guide – AP8997_2 3 ALLEN & HEATH
READ THESE INSTRUCTIONS FIRST:
Safety instructions
Before starting, read the IMPORTANT SAFETY INSTRUCTIONS sheet supplied
with the equipment and downloadable from the Allen & Heath web site. For your
own safety and that of the operator, crew and performers, follow all instructions
and heed all warnings printed in the sheet, this guide and on the equipment.
Sound levels
This equipment is capable of producing high sound levels which may be harmful
to your hearing. To avoid the risk of damage to your hearing when working with
headphones, ear pieces or loudspeakers do not operate at high volumes for an
extended period of time. The ME-1 mixer provides a limiter function which can be
set to prevent the level exceeding a comfortable maximum.
Mounting
The mixer is designed to be used on a flat surface or mounted to a microphone
stand using the built-in thread adapter or the mounting bracket supplied with the
unit. When using a mic stand locate it so that it is stable and will not topple over
and cause damage or injury. Ensure cables are routed to avoid a trip hazard.
General precautions
 To prevent damage to the mixer, avoid dropping it, placing objects on the
control surface, scratching the surface or screen with sharp objects, or rough
handling and vibration in operation or transit.
 Protect the equipment from damage through liquid or dust contamination.
Cover the mixer when it is not being used for a long period.
 Computer and screen technology can be affected by extreme heat or cold. If
the equipment has been stored in extreme cold allow time for it to reach normal
operating temperature before use. Avoid using the equipment in direct
sunlight. Recommended operating temperature is 5 to 35 degrees Celsius.
 Clean the control surface with a soft brush and dry lint-free cloth. Do not use
chemicals, abrasives or solvents.
 It is recommended that servicing is carried out only by an authorised Allen &
Heath agent. Save your data before sending the mixer for servicing. Allen &
Heath do not accept liability for damage or data loss caused by maintenance,
repair or modification by unauthorised personnel.
Operating firmware
The function of the ME-1 mixer is determined by the operating firmware that runs
within it. Firmware is updated when new features are added or improvements
made. Check the Allen & Heath web site for the latest version available. This can
be downloaded, transferred to USB key and then loaded into the ME-1 mixer using
the Firmware Setup menu.