Anchor NAVI-TRAC 40 WIDE GABLE-END - Manual (Page 15)

FABRIC TENSIONING
1. USE WEB/ RATCHETS TO SECURE
CATENARY ARCHES TO UPRIGHTS, STAKE
BASEPLATES BEFORE TENSIONING WEBS.
ATTACH WEB/RATCHET
TO TRIANGLE RING AND
TENSION DOWNWARD.
TENSIONING
WEB (RIGHT)
W/ RING
CATENARY TAILS
TENSIONING RINGS
OVERLAPPED
TOP
TENSIONING WEB
(LEFT) W/ RING
UPRIGHT
WEB/RATCHET
TENSIONING METHOD:
1. PASS RING OF LEFT TENSIONING WEB THROUGH OPPOSITE CATENARY RING.
2. PASS RING OF RIGHT TENSIONING WEB THROUGH ITS OWN CATENARY RING (PASSING OVER THE LEFT WEB).
3. CONTINUE RING OF RIGHT TENSIONING WEB THROUGH OPPOSITE CATENARY RING.
4. OVERLAP BOTH TENSION RINGS. ATTACH WEB/RATCHET AND TENSION DOWNARD AGAINST TENSION HOLE IN
UPRIGHT. (CATENARY RINGS SHOULD MOVE CLOSER TOGETHER AS RATCHET IS TIGHTENED.)
15
FOLD CURTAIN AND CATENARY BACK
ON TOP OF MID SO THAT THEY ARE
OUT OF THE WAY.
SNAP OF PULL ROPE MUST BE
FASTENED TO PULL WEB ON
UNDER SIDE OF FABRIC PIECES.
SNAP MUST FACE AWAY FROM
KEDAR.
KEDAR
FLAP - ONLY ONE
SIDE OF MID OR
END WILL HAVE
THE FLAP.
SAFE ATTACHMENT OF PULL
ROPES TO FABRIC
DIAGRAM SHOWING UNDER
SIDE OF FABRIC AT EAVE.