APG MPX Slave Sensor user manual - Manual (Page 11)

Rev. B, 4/13 MPX Series Magnetostrictive Level Sensors
11
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Step 3: select the mode of communication as shown below.
Modbus (RS-485):
(MPX-E1 and MPX-R1)
4-20 mA: check the box labeled “USB Communication (RST-4100)”
(MPX-E2, MPX-R2, MPX-E3, MPX-R3)
Select the appropriate Comm Port
when using direct serial communica-
tions. Check the “USB Communications
(RST-6001)” box when using the RST-
6001 communications module.
OR