APG MPX Slave Sensor user manual - Manual (Page 12)

MPX Series Magnetostrictive Level Sensors
Rev. B, 4/13
12
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Step 2: change the “Sensor #”
boxes to match the address’ of
the target sensors.
Step 3: Change the Description labels as desired. The Description is
used to differentiate between sensors in other areas of the software.
Step 4: Click “Save
Config” then “Close”.
Step 1: select the total number
of sensors you wish to read.
Configuring Software Communications for Multiple Sensors
(continued)