Safety practices – Autoquip COMPACT LIFT User Manual
Page 7
7
DANGER!
Scissors lifts are designed individually for a specific load and application.
To avoid personal injury, do not change the load or application from the
original design.
WARNING!
NEVER stand, sit or ride on the lift!
WARNING!
All warning and information decals should be in place as outlined in the
“Label Identification” section. If decals are missing or damaged, they
should be replaced with new ones. Contact Autoquip for replacements.
WARNING!
Do not attempt to remove the velocity fuse until the maintenance block
securely supports the lift and all hydraulic pressure has been removed from
the lifting cylinders and hydraulic hoses. Failure to do so could results in
personal injury or death!
WARNING!
Lift platforms traveling below floor levels may create openings, and the
shape of the load and how the load is arranged on the lift may create a toe
hazard as the load passes the top edge of the pit. Both situations may
require guarding in accordance with Federal Regulations. Any such
guarding must be installed prior to operating the lift.
SAFETY PRACTICES