Autoquip ABS AIR BAG LIFT - Manual (Page 11)

LIFT BLOCKING INSTRUCTIONS
1. Remove all load from the platform. Never block the lift when loaded, only when
empty.
2.
Raise the lift platform sufficiently to install the maintenance block between both
the lower leg rollers and base frame.
3.
Begin lowering the platform by activating the “DOWN” valve until the
maintenance bar is captured between the lower leg rollers and base frame.
Continue activating the “DOWN” valve five to ten seconds to relieve the air
pressure in the air bag.
4.
Always shut off the main air supply, when blocked, to prevent someone from
turning it on.
5. To remove the maintenance bar, raise the platform by activating the “UP” valve
to provide sufficient clearance for the removal of the maintenance bar.
WARNING!
To avoid personal injury, NEVER go under the lift platform until the load is
removed and the scissors mechanism is securely blocked in the open
position.
11