Autoquip ABS AIR BAG LIFT - Manual (Page 15)

Normally scissors lifts will require very little maintenance. However, a routine
maintenance program could prevent costly replacement of parts and/or downtime.
WARNING!
ROUTINE MAINTENANCE
To avoid personal injury, NEVER go under the lift platform or perform any
maintenance on the lift until the load is removed and the scissors
mechanism is securely blocked in the open position. See the "Lift Blocking
Instructions" section.
Monthly inspection should consist of the following:
1.
Check for visible air leaks; correct as necessary.
2.
Check any unusual noise when it occurs. Determine the source and correct as
necessary.
3.
Check the snap rings at all rollers, if not in place, and/or secure, replace or repair
immediately.
4.
Check all rollers for signs of wear. Replace as necessary.
5. Do
not grease roller or axles; they have lifetime-lubricated bearings.
6.
The lift has a safety relief valve, which is factory pre-set. The relief valve should
not be adjusted for any reason as it could cause the lift to fall uncontrollably.
15