Troubleshooting analysis – Autoquip COIL TRANSFER CARS User Manual
Page 36
36
PROBLEM
POSSIBLE CAUSE AND SOLUTION
Lift won’t go forward or
reverse
•
The traverse path may be blocked with debris or
other obstacle. Look under the base and
remove any obstacle that may impede travel.
•
The axle may be “high centered” on some
obstacle, preventing the wheels from gaining
enough traction. Inspect under the axles and
remove any obstruction.
•
The non-rotation devise may have broken or
vibrated loose. Reattach or replace bracket.
•
The load may exceed the nameplate capacity
and exceed the horsepower ratings for the drive
train. Ensure the load is within the rated limits.
•
There may not be enough amps available.
Check the supply amperage to ensure it
provides the minimum amperage needed per the
vendor’s specifications.
•
There may be a loose electrical connection.
Make sure all electrical connections are intact
and check for shorts.
TROUBLESHOOTING ANALYSIS