BAND-IT IT0750-AB Mini Tie-Lok Tool - Manual (Page 9)

Document # I17775 Rev D
© Copyright
BAND-IT-IDEX, Inc. 2009
All rights reserved
www.BAND-IT-IDEX.com
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street Denver, CO 80216-0307 USA
P: 1-800-525-0758 F: 1-800-624-3925
9 of 38
IT0750-AB
Mini Tie-Lok Tool
Handle adjustment:
• Using 1/4” hex key (supplied), adjust
the Support Arm/Handle to
ergonomically match the operators
hand.
• Be sure not to adjust the Handle too far
outward (beyond interlocking legs) or
the handle will not function properly or
provide support to the operator.
Hanger Support Instructions:
1. An aluminum hanger (accessory
option) can be utilized for supporting
the tool.
2. A hanger should be installed (as
shown) into the two threaded holes.
3. Secure the hanger against the tool
body with the two supplied screws.
4. A light application of vibratite is
already included on the screw’s
thread.
Hanger Mount
Setup &
Assembly
Instructions