BAND-IT SM1700 Pneumatic Center Punch Tool User Manual
Page 10
Document# SM1750 Rev. E
© Copyright
BAND-IT-IDEX, Inc. 2012
All rights reserved
www.BAND-IT-IDEX.com
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street Denver, CO 80216-3070 USA
P: 1-800-525-0758 F: 1-800-624-3925
10
SM1700
Pneumatic
Center Punch
Tool
Gripper
Assembly
Gripper pin access hole
Gripper
Clean teeth periodically
Gripper pin set screw
Loosen to remove gripper pin
Gripper springs
Tripper plate
Clean and lubricate
periodically
Gripper pin
•To remove gripper and/or tripper plate:
1. Unhook the 2 gripper springs
2. Bring the piston fully forward
3. Loosen the gripper pin set screw
4. Tap the gripper pin out
5. To remove tripper plate, move the piston
slightly back. Remove front plate, and slide
free
REPLACEMENT PARTS LIST FOR THE GRIPPING SYSTEM
Part Number Qty Description Contents
S45087 1 Tripper plate
S45199 1 Gripper Kit One Gripper and two Gripper springs