Online manual not for resale purposes – BLITZ Dual SBC Spec R & S User Manual

Page 11

Advertising

WARNING AND LIMITER MODE

-To shut off the warning leave the warning at 0. When warning is on "WARN" will appear. When the

LIMITER MODE

should appear. Then turn volume button to desired setting. ( Recommended - 7 to - 10 setting).

-The limiter does not work when limiter is set to 0. To turn the limiter off, set limiter to 0.

MODE BUTTON

VOLUME BUTTON

WARNING MODE

-The DSBC allows The user to set boost warning. This unit will sound and The screen will turn red
when boost levels are passing the desired warning.
-To set the warning, turn the Mode knob until the screen turns red and the " WARN " appears.
( If the DSBC is in the limiter mode, press the Volume button and it will switch to warning mode. )
-When in warning mode turn the Volume button to the desired warning setting.
-The warning is set in hkPa and can be set from 0 to 2.5 hkPa.

Warning is off the letter "WARN" will not show up.

-The limiter mode is activated automatically when boost levels go above the set warning.

-To set limiter mode unit must be in warning mode. Press volume button once and a negative sign

-This will reduce the boost the ratio set.

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this may be

reproduced, stored in retrevial systems, or transmitted in any form or means with out prior written permission of

Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals