Online manual not for resale purposes – BLITZ Toyota Celica Compressor System User Manual

Page 19

Advertising

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No parts of this manual may be
reproduced, stored in retrieval systems, or transmitted in any way without prior written permission of Blitz Co., Ltd. (Japan).

（

10）Installation of the (C. 1) compressor.

①

Install the

(C. h)

(C. p) Nut

(C. t)

(C. 1) compressor temporarily

by using the (C. 7) Compressor bracket,
(C. h) Flange bolt M8 X 50 (1P), (C. i)
Flange bolt M10 X 35 (1P), (C. k) Hex
Bolt M10 X 55 (1P), (C. p) Flange nut M8
(1P), and (C. t) Washer M10 (3P).

②

Loosen the (C. p) flange nut M8 (1P) that
was holding the (C. 2) intake manifold to

hold together the (C. 13) compressor

(C. 7)

Compressor

bracket

(C. t) Washer

（１．

Insert between the
(C. 1) compressor
and the (C. 7)

(C. k) Bolt
(C. t) Washer.
（

This washer is

used for the bolt’s
sitting surface）

(C. i) Bolt

stay.
※

The (C. 13) is temporarily tighten.

③

Attach temporarily the (C. 13)
compressor stay to the (C. 1)
compressor using the (C. i) flange bolt
M10 X 35 (1P) and the (C. q) flange nut
M10 (1P).

④

Tighten the bolts that were temporarily
tighten in step ①.
※

Appling torque.

Ｍ８＝２５Ｎ・ｍ（２５０ｋｇｆ・ｃｍ）

Ｍ１０＝４５Ｎ・ｍ（４５０ｋｇｆ・ｃｍ）

⑤

(C. 13) Compressor

(C. p) Nut

Tighten the bolts that were temporarily
tighten in step ②・③.
※

Appling torque.

Ｍ８＝３４Ｎ・ｍ（３４０ｋｇｆ・ｃｍ）

Ｍ１０＝４５Ｎ・ｍ（４５０ｋｇｆ・ｃｍ）

(C. 13) Compressor stay

(C. i) Bolt

(C. q) Nut

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals