Online manual not for resale purposes – BLITZ Toyota Celica Compressor System User Manual

Page 22

Advertising

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No parts of this manual may be
reproduced, stored in retrieval systems, or transmitted in any way without prior written permission of Blitz Co., Ltd. (Japan).

Ventilation hose No.2

(C. 51) Clamp L

(C. 50)

Rubber cap and

(C. 51) Clamp L

Vacuum

Hose

(C. 46) φ6

Tube ＆

(C. 47) φ4 Hose

＆

(C. 65) Lock tight

(C. 52) Clamp S

(18)Installation of hoses.

※

Make sure not to make mistakes in

connecting the hoses.

①

Plug the pipe where the throttle body
ventilation hose No. 1 used to connect
with the (C. 50) rubber cap φ 19 and
the (C. 51) clamp L (1P).

②

Connect the ventilation hose No.2 to the
(C. 2) intake manifold’s (C. 41) nippleφ
21 – 3/4PT using the genuine clamp.

③

Connect the vacuum hose to the (C. 2)
intake manifold’s genuine nipple using
the genuine clamp.

④

Connect the (C. 46) φ6 tube replaced on
step (16) to the (C. 40) nipple φ6-1/8PT
using the (C. 52) clamp S.

※

Cut the (C. 46) φ 6 tube to an

adequate length if it is long.

⑤

Connect the (C. 47) φ4 hose to the (C.
39) nippleφ4-1/8PT using the (C. 65)
lock tight so it does not come off.

(C. 12) Throttle

Cable Stay

Rubber

Genuine

（

19）Installation of the throttle cable.

①

Remove the rubber bushing from the
genuine throttle cable stay.

②

Install the removed bushing to the (C.
12) throttle cable stay as shown in the
diagram.

Throttle

Cable

(C. 12)
Throttle
Cable

Stay

(C. i) Bolt

③

Install the throttle cable stay with the
bushing to the (C. 2) intake manifold
using the (C. i) cap bolt M6X15 (2P).
※

Appling torque.

＝１０Ｎ・ｍ（１００ｋｇｆ・ｃｍ）

④

Install the throttle cable.

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals