CCTV Camera Pros iDVR-PRO A Series DVRs - Manual (Page 43)

English | 43
User Setting
You can configure the settings regarding user management and user and group permissions.
\ \ Management
You can add a user account(s) that can be edited at a later time.
1. From <SYSTEM SETUP> - <USER>, select
<MANAGEMENT>.
2. Use the [ ▲▼◀▶ /ENTER] buttons on the remote
control or use the mouse to add a user account or
select an item that you want to edit.
3. To apply the change, click <APPLY> in the bottom of
the screen.
4. When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen. The
confirmation message appears and you will return to
the previous menu.
To add a user account
1. Click <ADD> in the bottom of the screen.
2. Use the [ ▲▼◀▶ ] buttons on the remote control and
move to a desired item. Then, press [ENTER] to
select the item.
i
USER ID : enter the user ID using the virtual
keyboard.
i
PASSWORD : With the virtual keyboard, enter the
password.
i
GROUP : From <ADMIN>, <MANAGER>And
<USER>, select a group that the user belongs to.
i
EMAIL : Type in the e-mail address to which you will
receive notification of an event if it occurs.
i
EMAIL NOTIFY : Choose whether you will receive notification of an event if it occurs.
 To use <EMAIL NOTIFY>, a sendmail server and its port should be configured previously.
i
COVERT CHANNEL : You can set the channel to hide from a specific user.
 <COVERT CHANNEL> option hides the video of the selected channel from being displayed on the screen.
3. When done, click <OK>.
The added user account will be listed.
Sy
ste
m
S
ett
ing