CCTV Camera Pros iDVR-PRO A Series DVRs - Manual (Page 55)

English | 55
ON/OFF Schedule
You can activate or turn off the alarm output as scheduled.
1. Use the [ ▲▼◀▶ /ENTER] buttons on the remote
control or use the mouse to select a <DATE> for the
schedule.
2. Drag the mouse to resize the cell or use the on the
[ ▲▼◀▶ ] buttons to move to the cell, then press
[ENTER].
3. Select a desired alarm output mode.
i
ON : The alarm output is always turned on.
i
OFF : The alarm output is always turned off.
i
EVENT : Trigger the alarm output in sync with the
event.
4. Click <COPY SCHEDULE> to check the checkbox of
the date that you want to copy the schedule at.
5. When done, click <OK> to apply the settings.
6. To apply the change, click <APPLY> in the bottom of
the screen.
7. When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen. The
confirmation message appears and you will return to
the previous menu.
\ \ Event Notification
Specify the methods of notification such as buzzer, video popup or email if an event occurs.
1. From <SYSTEM SETUP> - <EVENT>, select <EVENT NOTIFICATION>.
2. Use the [ ▲▼◀▶ ] buttons on the remote control or use the mouse to select one from <BUZZER>, <DISPLAY> and
<EMAIL>.
3. Use the [ ▲▼◀▶ /ENTER] buttons on the remote control or use the mouse to set the output method and duration.
4. To apply the change, click <APPLY> in the bottom of the screen.
5. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
Sy
ste
m
S
ett
ing