CHAMPION EEUCCW8 - Manual (Page 48)

40
The Conveyor Shut-off Shelf is designed to stop the
conveyor belt when wares traveling on the conveyor belt
reach the end of the unload section. This prevents wares
from being damaged and prevents the conveyor belt from
jamming.The Shut-off Shelf is located on the extreme end
of the un-load end section of the dishwasher.
The Conveyor Shut-off Shelf functions in the following way:
1. When wares contact the shut-off shelf the shelf
pivots backward stopping the conveyor belt.
2. The shut-off shelf also will stop the optional
blower-dryer heat off if the machine is equipped
with the blower-dryer.
3. The wash pumps continue to run when the
conveyor belt stops
4. The machine operator should remove the wares
on the unload section of the belt making sure
that no wares have fallen below the conveyor
belt.
5. In the event that wares have fallen below the belt,
the operator must turn power off at the control
panel and then remove any wares. The machine
can be restarted when the wares are clear.
6. The conveyor belt will not run until the conveyor
shut-off shelf is moved back to the RUN position
as shown in the photos to the right.
Conveyor Shut-off shelf in the RUN position
Conveyor Shut-off shelf in the STOP position
Operation
Operation
WARNING:
Moving Conveyor Parts may cause INJURY OR DEATH.
Keep hands and clothing clear of the conveyor when the
conveyor is moving.
USE EXTREME CAUTION WHEN THE CONVEYOR
IS MOVING.
Conveyor Shut-off Shelf