chiliGREEN RC410M -A82C - Manual (Page 10)

10 10 10 10 10
Technical Reference Booklet
SPEAKER CONFIGURATION
Method 1: 4/6 Surround audio output of back panel only.
After installing the audio drivers, you can attach the speakers for 2-/4-/6-channel
audio output. Always connect the speakers to the LINE OUT connectors.
Different connector configurations for 2-/4-/6-channel operations are listed
below:
2-Channel 4-Channel 6-Channel
In 2-channel configuration,
Line Out, Line In and MIC
functions all exist. When set to 4-channel
configuration, Line In
is replaced by Rear
Speaker Out. The Line in
function does not exist. When set to 6-channel
configuration, Line In is replaced
by Rear Speaker Out. Mic is
replaced by Center/Subwoofer
Speaker Out. Line in and Mic
functions do not exist.
AUDIO CONFIGURATION
After installing the audio driver, you can select 2/4/6 channel surround
audio output in the software utility and then connect surround speakers to
appropriate audio ports.
There are two ways to obtain 2/4/6 channel surround audio output:
1. Using the 4/6 surround audio output of the back panel only. All surround
speaker connect to this audio connector.
2. Using the S-Bracket (optional cable). You have installed the S-Bracket into
the computer. Connect two front speakers to back panel’s “Line Out” port,
and the rest of speakers to S-Bracket. For connection details, please refer to
page 15.