chiliGREEN RC410M -A82C - Manual (Page 12)

12 12 12 12 12
Technical Reference Booklet
Method 2: Using S-BRACKET connectors:
The S-Bracket (shown on page 15) is an optional accessory. It gives access to
analog and digital audio output by integrating both SPDIF and analog LINE
OUT connectors. To use the S-Bracket, you should select the correct settings
in the software utility. For information about the setting, refer to selecting 4- or
6- Channel Settings later in the section.
Connector configurations for 4- and 6- channel using S-Bracket are described
below:
4-Channel Analog Audio Output
Back Panel S-Bracket
1
2
3
SPDIF jack (coaxial)
Rear Speaker Out
No function
(Front channels)
Description: Description: Description: Description: Description:
Connect two speakers to the back panel’s Line Out connector and two
speakers to one Line Out connector on the S-Bracket, or connect all four
speakers to one connector on the S-Bracket. If you want to use the Line In
function, please click the Rear Speaker Out button (shown below).
1 2 3
+