chiliGREEN RC410M -A82C - Manual (Page 14)

14 14 14 14 14
Technical Reference Booklet
CONNECTORS
The motherboard provides connectors to connect to the FDD, IDE HDD, and
USB Ports and to the CPU/System FAN etc.
Floppy Disk Drive Connector: CN3
The motherboard provides a standard floppy disk drive connector that supports
1.44M, 2.88M floppy disk types.
Hard Disk Connectors: CN1&CN2
The motherboard has a 32-bit Enhanced PCI IDE and Ultra DMA 33/66/100/
133 controller that provides PIO mode 0~4, Bus Master, and Ultra DMA 33/66/
100/133 function. You can connect up to four hard disk drives, CD-ROMs,
120MB
Floppy (reserved for future BIOS) and other devices.
CN1 (Primary IDE Connector)
The first hard drive should always be connected to CN1. CN1 can connect a
Master and a Slave drive.You must configure the second hard drive to Slave
mode by setting the jumper accordingly.
CN2 (Secondary IDE Connector)
CN2 can also connect a Master and a Slave drive.
CN3
CN1 CN2
1
1 1
FO
X C
O N
N
R E M OVE