Behind spoke (hidden weight) – COATS 1175 Series Balancer User Manual
Page 14
8 •
Important: Always read and follow the instructions.
Behind Spoke (Hidden Weight)
The SPLIT function is used to position the adhesive
weights behind the wheel spokes so that they are not
visible. This function should be used only in the case of
static unbalance or where the hidden adhesive weight
is to be applied on the outside. Input the wheel dimen-
sions and do a spin.
Start the SPLIT function as follows:
- Place the wheel in the outside unbalance correction
position.
- Set one of the top spokes (preferably the one to the
left of the unbalance) to 12 o’clock.
- Press
Indication of first positioning detected
- Follow the UP/DOWN indication of the arrows and
set the second top spoke to 12 o’clock.
- Press button
- Place the first Split unbalance in correction position 1
- Correction position 1 (indicator 1)
- Correction position 2 (indicator 2)
To return to normal unbalance display, press any but-
ton.
To carry out a new spin, press the
button.
15
30
15
30
15
30