COATS 1175 Series Balancer - Manual (Page 15)

Important: Always read and follow the instructions. • 9
Match Mount
- This function serves to reduce the amount of weight
to be added in order to balance the wheel
- It is suitable for static unbalance exceeding 1.5oz
(30g).
- It improves the residual eccentricity of the tire.
- With a piece of chalk make a reference mark on the
flange and the rim.
- With the aid of a tire remover, turn the tire on the rim
by 180˚.
- Refit the wheel in such a way that the reference
marks on the rim and the flange coincide.
- RH display: percentage reduction valve.
- LH display: actual static unbalance valve which can
be reduced by rotation.
RIM IN POSITION INDICATION
- Mark the tire (12 o’clock position).
TIRE IN POSITION INDICATION
- Mark the rim (12 o’clock position).
Turn the tire on the rim until the marks correspond to
obtain the optimization shown on the display.
CANCEL OPTIMIZATION IN ANY PHASE.
Unbalance
already measured
Unbalance measured
No previous
unbalance
measurement